Dosing accessories

A wide choice is available to complete your installation involving dosing pumps; Graduated cylinders, counter pressure valves, water meters, injectors, flow check sensors, and much more …

Retractable Injector

Very important accessory when the chemical must be injected into the center of the pipes. They can be removed at any time even when the process is in operation.

Injector

Very important accessory when the chemical must be injected into the center of the ducts. They can not be removed from the process without stopping the operation of the process once installed.

Pulse Shock Absorbers

These accessories are essential to eliminate the large variations in flow that can be caused by the pulses of the pumps. They reduce the wear of the parts that are attached to the dosing system by eliminating the hammer blows in the ducts.

Pressure indicator

A large choice of pressure gauge is offered; Needle or digital display.

Cylinders, graduated

Graduated cylinders made of PVC, glass or polypropylene, graduation possible; From 100 ml to 20 liters.

Walchem Back Pressure and Release Valve

Pressure and / or safety valves by releasing excess pressure from the ducts. These valves are all adjustable up to 125 PSI max.

Valve Auto Degassing – ADV

Check that your dosing pump is pumping continuously and does not lose its priming.

Rotammeters

Walchem level switches

These probes are easy to use and are not expensive. Ideal for installing with 45 gallon barrels.

Water meters Walchem

A wide choice of water meters. Available in most pipe diameters.

Flow check sensors

Posiflow – Pressure
FCM – Mechanics
Flow checker – Tirbine
EFS – Magnetic
These instruments are for the detection of discharge rate of a metering pump. It connects directly to EWN series pumps or Walchem controllers.

Tablettes de pompes doseuses SS 316

Petites: Largeur 6”1/8 x Hauteur 3”3/4 x Profondeur 6”3/4
Moyennes: Largeur 6”1/2 x Hauteur 3”3/4 x Profondeur 12”
Large: Largeur 8”1/8 x Hauteur 5”3/4 x Profondeur 11” Économique $$$

Injection valves

3/8 OD tubing
1/2 OD Tubing
PVC – Viton
PVC – EPDM
PVC- Aflas
Polypro glass reinforced – Viton
Polypro glass reinforced – EPDM
Polypro glass reinforced- Aflas
PVDF – Viton
PVDF – Teflon
PVC- Aflas

Valves of valve

3/8 OD tubing
1/2 OD Tubing
PVC – Viton
PVC – EPDM
PVC- Aflas
Polypro glass reinforced – Viton
Polypro glass reinforced – EPDM
Polypro glass reinforced- Aflas
PVDF – Viton
PVDF – Teflon
PVC- Aflas

WJ Series – Turbine Counters

Turbine meter flow with cast iron body in sizes 2 “to 8”
Suitable for water treatment, remote totalization, controls for electronic dosing pumps
Mechanical register
No power required
Compact Flowmeter with ANSI Standard Flanges
Reed Switch
Can be installed in factory or other type of installation

Prewired connectors for Iwaki pumps

IX0019 = E90494 & E90496
IX0018 = E90495
IX0020 = E90497
To false your connections

Ask your devi





Your Name (required)

Your Email (required)

Subject

Your Message